Your basket

Free home delivery from 79€

You're only missing

79 €
Got a promo code?
Total items 0,00 €
Delivery Calculated in the next step
Total 0,00 €*
Accepted and secure payment methods
Login
Your favorite items

Log in to access your wishlist

Notifications

*Conditions: Welcome code sent by email after Newsletter subscription. Remember to check your spam folder. Offer cannot be combined with other promotional codes and is valid on the least expensive item in your cart.

🚚 Enjoy free shipping on orders over €79
Logo
← L'actu Kodak

12 min read

Microphones and audio recorders: capturing clear sound in video reporting

Viewers will forgive a slightly shaky image. A crackling audio track, on the other hand, will make them close the video without a second thought. It’s unfair, but that’s the way it is.

But if you’re just starting out, bear in mind that a good microphone and a few simple tips are often all it takes to make a voice sound clear and pleasant to listen to. Whether it’s a news report, an interview or a school video project, sound recording is easier to master than you might think. Let’s see how to go about it.

What is sound recording?

Before we talk about equipment, there are a few basics you need to know. Sound recording encompasses everything involved in capturing a voice or ambient sound for use in a video. A few simple concepts are all it takes to avoid unpleasant surprises during editing.

How sound recording affects the footage

Recording sound means capturing what is said and what can be heard on set. A microphone converts air vibrations into an electrical signal, which a recorder then saves as a file. The principle is actually very simple.

It’s the effect on the footage that matters. A video with clear sound looks more polished, even with a very basic shot. Conversely, muddled sound spoils even the most beautiful footage, and the viewer loses interest without really knowing why (do you know why now?).

In reality, there are three common pitfalls that almost always crop up.

Firstly, there’s distance. The further the microphone is from the mouth, the more the voice gets drowned out by other sounds. The volume drops and the noises in the room take over.

Next, ambient noise. Traffic, wind, nearby conversations, ventilation. The microphone picks up everything, without filtering it out as our ears do.

Finally, let’s talk about reverberation. In an empty or tiled room, sound bounces off the walls. The voice becomes hollow, with an echo effect that makes listening tiring.

These three problems are mainly corrected by the microphone’s position. Bear this in mind; it comes up throughout the article.

Why use a recording microphone rather than the camera’s microphone?

The microphone on a camera or smartphone has to do everything, so it doesn’t specialise in anything. It remains several metres away from the person speaking. It therefore picks up their voice, but also the entire room.

Fortunately, a dedicated recording microphone solves this in three ways.

It gets closer to the sound source. Placed on a table or held twenty centimetres from the speaker, it isolates the voice far better than a camera left on its tripod.

It provides a backup audio track. Has the camera crashed, is the wind ruining a take, or is the memory card full? You’ll still have a clean track, recorded separately.

It separates the sound from the image. Each device takes up the best position. The camera frames the shot; the recorder captures the sound. During editing, you can synchronise the two.

This gives you greater freedom on set and peace of mind when working on the computer.

Which device records the sound?

Your new reporting companion is the voice recorder. It’s often associated with note-taking, but it also makes a very good pocket microphone and recorder. You can also make the most of it in the classroom. Indeed, the voice recorder and revision go hand in hand throughout the school year.

As a first step into audio reporting, the Kodak VRC250 voice recorder fits easily into your project. It measures 102 x 33 x 12 mm and fits in a jacket pocket. It records in mono, which is more than enough for a single voice. Its battery life is up to 20 hours. Its built-in microphone does most of the work, but a 3.5 mm jack input also allows you to connect an external microphone. A lavalier microphone clipped to your collar, for example, brings the microphone closer to your mouth whilst the device remains discreet in your pocket. Its programmable recording function starts recording at the chosen time, without you having to touch it.

By way of example, there are three useful situations in which you can use it.

For location scouting in particular. Before filming, you record for a minute in the room or on the street. When you listen back, you know straight away whether the echo is a problem or whether traffic noise will drown out the voices.

As mentioned above, this can serve as back-up audio. You place the recorder near the interviewee whilst the camera is rolling. If the main take is disappointing, the second one saves the day.

And why not a filmed presentation? A guest speaker comes to talk about their profession to the class. You film them from a distance, but the recorder placed on the lectern captures their voice up close.

In all three cases, do a ten-second test before you start and listen to the result through your headphones.

VRC 250
VRC 250

How do you capture sound? How do you record someone speaking?

In practice, these two questions are one and the same. To capture good sound, you need to know where to position the microphone, how to adjust it and what to avoid in its vicinity. Let’s move on to the situations you’ll encounter whilst filming.

Positioning the recording microphone correctly towards the speaker

Let’s start with the most important step. To record someone speaking, move the device closer to their mouth. Aim for between fifteen and twenty centimetres. Position the microphone slightly below the chin, angled towards the speaker. This helps avoid the small pops on letters such as ‘p’ or ‘b’, which can quickly cause distortion.

Next, you need to adjust the volume level. Ask the person to say a sentence at a normal volume, then listen back. If the sound is distorted, turn it down. If it’s too quiet, move the device closer before adjusting the settings. Finally, start recording once you’ve carried out these two checks, not before.

The Kodak VRC350 voice recorder makes this task easier thanks to its recording modes. There are four in total: Normal, Outdoor, Meeting and Long Range. Each one adapts the recording to the situation, without you having to adjust everything manually. This is important when the interview is due to start in two minutes. The device also features voice activation with six sensitivity levels, which starts recording as soon as someone speaks. Ten bookmarks per recording allow you to mark the sections you want to keep. A 3.5 mm external microphone input supports a lavalier microphone.

In practice, on the street, switch to the Outdoor mode and hold the device close to the person you’re interviewing. The voice remains in the foreground, whilst cars pass in the background.

Around a round table, the ‘Meeting’ mode does the job. Place the recorder in the centre and ensure everyone speaks from roughly the same distance; otherwise, some voices will be drowned out.

In a classroom or lecture theatre, the speaker is often some distance away. In this case, select ‘Long Range’ and add a bookmark to every response worth keeping. When editing, you’ll be able to find your clips in a matter of seconds.

VRC 350
VRC 350

Mono or stereo on your voice recorder: choose according to the setting

Let’s keep it simple: a single voice is fine in mono. A single channel is enough for one person speaking directly to you. As soon as you need to capture the atmosphere, stereo adds width. You can hear where the sounds are coming from – left, right, or front. The sense of being there is much stronger.

The Kodak VRC450 voice recorder records in stereo, with a dual omnidirectional microphone. It reproduces frequencies from 20 Hz to 20 kHz, which covers almost the entire range perceivable by the human ear. Its noise-reduction function minimises background noise. Its microSD slot accepts cards of up to 32 GB, which is handy when you’ve got lots of footage to record.

Think of the ambient sound as raw material that you’re gathering for editing. At the market, for example, record twenty seconds without speaking. The voices of the traders, the clatter of crates and the sound of footsteps will create a background soundscape that brings your footage to life.

For a choir concert, position the recorder facing the group, slightly raised. The stereo recording captures the space between the voices, and you can almost feel the atmosphere of the hall. Keep your distance from the speakers if the concert is amplified; otherwise, the sound will become distorted.

A music lesson or a cookery workshop also lends itself well to this exercise. The sizzling of a frying pan or the sound of a knife tapping on a chopping board adds depth to an educational video. This is often what the viewer remembers.

VRC 450
VRC 450

Wind, echo, background noise: simple tricks to save a sound recording

Even the best microphone can’t compensate for a poor recording environment. But a few simple habits can sort out most problems. Let’s look at them together.

If there’s a draught, turn your back to the draught and position the person between it and the camera. A foam windscreen on the microphone also helps. In a room with a lot of echo, move even closer and choose a corner with curtains, a sofa or full shelves. These surfaces absorb sound where a bare wall would bounce it back.

Turn off whatever you can. The fridge, the ventilation system, a telly in the background. Also put your phone in aeroplane mode, as some interference can creep into the recording.

If you’re holding the device in your hand, avoid sliding your fingers over it or changing position. Any friction can be heard very loudly. Instead, place it on a stand; a folded towel will dampen vibrations from the table.

Finally, wear headphones whilst recording. You’ll hear what the device picks up, including echoes and noises your ear wouldn’t normally notice.

How can you achieve the best audio quality?

Good placement alone will give you a clean sound. To take it further, it all comes down to what you do before you start recording, and then afterwards, when you’re syncing the audio to the video. Adopt these two habits and your final result will be completely transformed.

Adjust your recording microphone before pressing REC

Start with the format. WAV preserves the full sound quality, without compression. The files are large, but you’ll have plenty of scope for editing later. MP3 is smaller and is sufficient for a memo or a casual recording. For a report intended for editing, opt for WAV.

Next, check the bitrate. The higher it is, the more faithful the sound quality and the more storage space the file takes up. So check your remaining storage before you set off. Also, charge the battery the night before. Nothing is more frustrating than a device running out of power in the middle of an interview.

For long days, the Kodak VRC550 voice recorder has been designed with this in mind. It’s the top-of-the-range model in the series, with stereo recording. It features 16 GB of internal memory and supports a microSD card of up to 32 GB. Its battery life is up to 20 hours. Its metal casing is robust enough to withstand being carried in bags or pockets. Noise reduction minimises background hiss, and the 3.5 mm microphone jack accepts an external microphone if the situation requires it.

Over a full day of reporting, you can record interviews, ambient sound and cutaway shots one after the other without running out of memory or having to find a power socket.

For a fair or a tournament, the device keeps pace with the event. Speeches, laughter, the buzz of the crowd, everything is captured in stereo over several hours.

At a conference, place the recorder near the lectern, or connect it to a microphone. It’ll keep going without you having to keep an eye on it. Just do a five-minute test before you start to check the levels.

VRC 550
VRC 550

Synchronising sound and picture during editing

When the sound comes from one device and the picture from another, you’ll need to synchronise them. To do this, simply set a common reference point.

The simplest method is still the clapperboard. Clap your hands in front of the camera whilst the recorder is running. During editing, the peak from the clapperboard will appear on both tracks, and all you need to do is align them, clever! It’s an old film trick that still works a treat.

Also keep the camera’s audio, even if it’s poor quality. It serves as a guide for syncing the recorder’s track, and you can cut it out later. Finally, make use of bookmarks and file timestamps. They help you quickly find a specific section amongst several hours of raw footage.

For filming at home, the Vlog Pack: Dictaphone & Ring Light has everything you need. It includes the VRC350 Dictaphone, whose scenes and bookmarks are described above. It also includes a 10-inch ring light with a tripod. Its ring of 120 LEDs offers adjustable brightness from 10 to 100 per cent. It illuminates your face softly and evenly.

It’s suitable for a range of uses.

For a vlog, you speak directly to the camera. The ring light illuminates your face whilst the recorder, placed next to you, captures your voice up close. It’s also brilliant for a tutorial. Whether you’re demonstrating a movement, a recipe or a setting, the audio remains clear even when the image moves. And for an interview at home, position your guest facing the light and place the recorder between the two of you. A quick clap at the start of the take will serve as a cue for editing, as explained above.

Your footage will finally have the sound quality it deserves

To summarise, position the microphone close to the speaker, adjust your voice recorder before filming, then set a cue to synchronise the sound and picture. These three steps take very little time and make a big difference to the final result. With a bit of practice, they’ll become second nature.

When it comes to equipment, the Kodak audio range covers a variety of needs, from the VRC250 Dictaphone to the VRC550, including the Vlog Pack. Choose the one that suits your filming style, then test it, listen to it and make adjustments. Your next report will already sound better.